Propellers

Mercury Racing is passionate about building the highest quality sterndrives on the planet! Along with our parent company Mercury Marine, we’re the first first U.S. marine engine manufacturer to be ISO 9001:2000 certified.

Photo of Propellers
Mirage Plus
Mirage Plus

Mercury Racing propeller specialists have enhanced the performance of the three- blade Mirage Plus propeller to strategic Lab Finishing specifications for maximum performance. Lab Finishing Technicians lab finish these popular Bravo One, X, XR and Sport Master sterndrive propellers by thinning propeller blade surfaces in specific areas, modifying the leading and trailing edges and balancing the propeller all for maximum efficiency. The propellers provide top performance in a variety of performance boat applications. The Mercury Racing Lab Finished Mirage Plus propeller is designed for vee bottom applications requiring bow lift. Offered LH and RH rotation in 23" - 29" pitch.

Learn More
Bravo I
Bravo I

Mercury Racing propeller specialists have enhanced the performance of the four-blade Bravo I propeller to strategic Lab Finishing specifications for maximum performance. Lab Finishing Technicians lab finish these popular Bravo One, X, XR and Sport Master sterndrive and Verado propellers by thinning propeller blade surfaces in specific areas, modifying the leading and trailing edges and balancing the propeller all for maximum efficiency. The propellers provide top performance in a variety of performance boat applications.

Learn More
Maximus ST (Short Tube)
Pro Finish Maximus ST (Short Tube)

Designed for sterndrives and big horsepower outboards, the Pro Finish Maximus ST (short tube) propeller is available in 24" to 34" (even) pitch sizes in both left and right-hand rotation. It features a cut-down diameter (15.6” to 15.3”) and a shortened exhaust tube for enhanced performance. The Maximus ST is rated for up to 600 h.p.

Learn More
Bravo Three XR
Bravo Three XR

This robust set of counter rotating, stainless steel propellers was designed for use on big boats with big power. A large diameter four-blade front propeller coupled with a smaller diameter, three-blade rear propeller provides unmatched acceleration, tracking and handling. Enormous cup built in to the trailing edges of both front and rear props results with tremendous planing performance and enhanced fuel economy. The enhanced cup is especially useful for high torque diesel applications.

Learn More
Maximus®
Lab Finish Maximus®

Mercury Racing propeller specialists have enhanced the performance of the five-blade Maximus propeller to strategic Lab Finishing specifications for maximum performance. The recently introduced Maximus five-blade is working it's way to being one of the best performers for step bottom boats offering incredible slip reduction capabilities ... translation, eye popping planing performance, jaw dropping mid-range speeds and with many applications increased top end speeds over the Bravo I propeller.

Learn More
Pro Finish 5-Blade CNC Cleaver
Pro Finish Pro Finish 5-Blade CNC Cleaver

Offshore racers and poker runners looking to maximize their hull performance turn to Mercury Racing's CNC machined cleaver sterndrive propellers. The highly polished props are the result of a need for a durable propeller design with stamina to transfer the massive torque and surface piercing impact of the Mercury Racing's revolutionary quad cam four valve (QC4v) 1350 sterndrive engine package.

Learn More
Pro Finish 6-Blade CNC Cleaver
Pro Finish Pro Finish 6-Blade CNC Cleaver

Offshore racers and poker runners looking to maximize their hull performance turn to Mercury Racing's CNC machined cleaver sterndrive propellers. The popular 6-blade CNC cleavers are available with 15, 18 or 21-degree blade rake angles, offered in 1200 hp, 850 hp and 600 hp ratings. Both are available with 15, 18 or 21-degree blade rake angles, offered in 1200 hp, 850 hp and 600 hp ratings. Models range from 15" (381 mm) to 18" (457.2 mm) diameters and pitch ranges from 30" (762 mm) to 40" (1016 mm) and limited 26" to 29" pitch.

Learn More
Bravo I OC
Pro Finish Bravo I OC

The Pro Finish Bravo I OC (Outboard Catamaran) features a total of eight Performance Vent System (PVS) vent holes for fine-tuned performance on high-powered outboard catamarans. The prop diameter is cut down to 14.75" and features a pitch range of 28 to 35 (even and odd) sizes and left- and right-hand rotation. A shortened exhaust barrel settles the stern to minimize drag, while a reshaped blade maximizes performance. The prop has been tested on 28-foot to 32-foot Skaters, Talon, DCB, Spectre and Doug Wright hulls. It outperformed three- and four-blade cleavers in both acceleration and top-end speed (medium to heavy loads).

Learn More
Chopper® II
Lab Finish Chopper® II

A new casting technique makes the Chopper II propeller more durable than ever. The new Chopper II, an improved version of the original Chopper propeller, works well on heavier boats that need bow lift. The enhanced bow lift reduces drag, increasing the efficiency of the boat and improving overall performance. The Chopper II permits higher engine mounting on the transom for greater speed.

Learn More
Lightning E.T.®
Lab Finish Lightning E.T.®

A new casting technique makes the Lightning E.T. propeller more durable than ever. The Lightning E.T., first introduced as an outboard drag racing propeller, is providing top performance in a variety of boat applications (bass, flats and modified vee bottoms. Besides delivering an incredible hole shot and awesome acceleration, the Lightning E.T. also produces natural bow lift, reducing drag and increasing the efficiency of the boat. This adds up to higher speeds and better fuel economy, requiring less engine trim. Both Chopper II and Lightning E.T. propellers are available in 14.5" (368.3 mm) diameter, with 24"- 32" (609.6 mm - 812.8 mm) pitch in right-hand and left-hand rotation. Models with 14.5" (368.3 mm) diameter, 22" (558.8 mm) pitch are available in right-hand rotation only.

Learn More
Pro E.T.®
Pro Finish Pro E.T.®

The new 4-blade Pro E.T.® outboard propeller is based off the popular three-blade Lightning E.T. Rated for 300 h.p., the new Pro E.T. is a natural for the new OptiMax 300XS outboard. New to this particular propeller is an option of Pro Finish or Lab Finish.

Learn More
3-Blade Cleaver
Lab Finish 3-Blade Cleaver

Our over-the-hub outboard cleavers are inspired from racing and designed to run flat-out at the water’s surface. They’re offered in both a Pro Finish and Lab Finish model. The Pro Finish boasts three stout blades with durable leading edges perfectly suited for higher horsepower applications for the long haul.s. The Lab Finish features thinner blades, crisp leading and tight trailing edges for those with a need for speed.

Learn More
4-Blade Cleaver
Lab Finish 4-Blade Cleaver

The over the hub exhaust style cleaver propeller, inspired from racing, are designed to run at the water surface for maximum efficiency. They work best on 150 - 300 HP outboards with lightweight hulls which have natural bow lift.

Learn More
Bravo I® FS
Pro Finish Bravo I® FS

GET DIALED-IN WITH NEW BRAVO I FS PROPELLERS. The versatility of our popular Pro finish Bravo I FS propellers has expanded with the addition of Mercury’s Performance Vent System. The adjustable propeller exhaust vent system enables operators to dial-in their propeller for peak performance. Solid PVS fittings are installed at the factory. Optional open vent fittings are included with each propeller.

Learn More
Bravo I® XS
Pro Finish Bravo I® XS

The Mercury Racing Pro Finished Bravo I XS outboard propellers offer excellent time to plane performance, sweet mid-range punch and awesome top-end speeds for bass, flats, cat flats and performance center console bay boats.

Learn More
Bravo I®
Lab Finish Bravo I®

The Mercury Racing Lab Finished Bravo I propellers offer great planing performance, excellent mid-range speeds and awesome top end speeds for center console applications.

Learn More
T.E. Cleaver
Lab Finish T.E. Cleaver

Mercury Racing produces the through hub exhaust Cleaver for 40 - 60 HP outboards designed to run high for maximum speed. The Cleaver works best with light weight hulls primarily cats or tunnels and limited use with vee bottoms.

Learn More
Pro Max
Pro Finish Pro Max

THIS STAINLESS STEEL PROP - DESIGNED FOR high-performance OptiMax® Pro XS and 300XS, and Verado® Pro FourStroke outboards - features Mercury Racing® Pro E.T.® drag race blades combined with a custom through-hub exhaust tube. This unique combination provides a 33 percent faster hole shot than the Pro E.T. and top-end speeds up to three mph faster.

Learn More