600HP-Rated CNC Cleaver

The surface-piercing 5-blade CNC cleaver propeller is designed to maximize top-end speed on performance hulls powered by Mercury Racing 520, 525, 540, 565 and 600 SCI when mated to the Bravo XR Sport and Sport Master drives.

Photo of 600HP-Rated CNC Cleaver

MODEL DETAILS

The surface-piercing 5-blade CNC cleaver propeller is designed to maximize top-end speed on performance hulls powered by Mercury Racing 520, 525, 540, 565 and 600 SCI when mated to the Bravo XR Sport and Sport Master drives.

Specifications

The 600HP-Rated CNC Cleaver is produced on the same state-of-the-art CNC machines used to mill Mercury Racing’s M6 and M8 drive Cleavers. Available dimensions are 14.75 to 15.50-inch diameter, 26 to 40 pitch, 15- and 18- degree rake.

Every CNC propeller is delivered in a Mercury Racing Propeller Case. All 600HP-Rated CNC Cleavers are to be custom ordered through Mercury Racing Sales via a registered Mercury dealer.

  • For dramatically reduced slip percentages in Bravo XR Sport and Sport Master applications, averaging 4.5% at WOT.
  • The CNC propeller makes the most of the Sport Master gearcase and elevated engine heights.
  • Quarter-inch diameter and one-inch pitch increments for precise tuning.
  • In similar applications, the MAX5 is often the propeller of choice for all-around performance, but the CNC goes unmatched in both top-end speed and handling.
  • Run pitch for pitch with the MAX5 and see dramatically increased top-end performance with the ability to run a larger diameter.

Racing Is All In The Family

A Case for Prop Protection

Sign up to receive the latest tips, promotions and news from mercury racing.

High Performance Marine Engines